Saltwater and sand have always been assassins for our fishing gear, but still so many people let it die in cable breakage or derailment just for saving a few dollars and time. Fishing gear maintenance is important and necessary. It’s high time that you move and do something before everything becomes lagged or rusty.
1. Fishing Gear Maintenance for Reel & Custom Upgrade
Rest assured that you have to give up high-pressure water gun and use slow current to wash up the reel. For TPE/EVA knobs you need to take advantage of warm water to wash off the fishy odor and mucus, Air-dryed in a cool, well-ventilated area. If it is with the cork, aluminum or titanium knobs, one more step is to wipe off the water and dry in the sun. If a rustling sound is detected during rotation, then the bearing should be removed. You can buy some reel oil on Amazon and drop it onto the dual bearings in the reel and bearing.
2. Fishing Gear Maintenance for Handles
Spinning Reel Handles
Before installing the rocker arm, apply a thin layer of marine grease to the threaded or hexagonal shaft which will create an excellent waterproof barrier, making it easier to remove next time.
Baitcasting & Conventional Reel Handles
After removing the rocker arm, focus on cleaning the drive shaft hole, the lock nut, and the retainer plate. When reinstalling the nut, avoid over-tightening to prevent thread stripping or damage to the Star Drag at the base. Tighten it only until it is securely in place and the hole is properly aligned with the fixing plate.
3. Solving Corrosion at the Source for All Accessories
Let’s take a look at how much difference there is between the high-carbon steel and ordinary stainless steel:
High-Carbon Steel: Almost no combat effectiveness resisting in corrosion, no oil then rusty to death.
Ordinary Stainless Steel: The surface is Dwayne Johnson’s arm, but the gaps Achilles’ heel, which means it will finally be rusty in the inner part though it looks perfect in the outside.
As both of them are Dr.Fauci, we need a real one to deal with this problem, and that is titanium steel. Titanium steel is definitely the toughest guy to cope with corrosion . It simply reduces the maintenance costs and make sure you will not be in trouble with rust-locked.
4. Fishing Gear Maintenance for Heavy-Duty Plier
Step 1: Remove minor salt deposits from the occlusal tooth lines and the cutting edge.
Step 2: Dry it in the sun.
Step 3: Add 1–2 drops of marine-grade rust preventive lubricant.
Fishing in saltwater needs this to be done every time you close, while in freshwater, 1 time per month. But if you start to not think anything about fishing, before you retire the rod, you need to do the steps at least one time. Check Heavy Duty Split Ring Pliers Tips and Best Titanium Saltwater Pliers to cut the braided fishing line in a smarter way!
