2026 Best&Most Complete Fishing Reel Handle Upgrade for Shimano

Remove the screw of the handle nut retainer and, using a screwdriver, remove the lock plate from the handle.

Using a 10 mm wrench, unscrew the main handle nut counter-clockwise and gently take off the existing drive handle set.

Remove the stack of the original spring washer of the star drag clicker, without changing the orientation of the washers.

Place the new Gomexus 6-Arm Aluminum Star Drag Item over the drive shaft, reattach the handle arm, and tighten the lock nut.

Take off the lock cap screw from the Shimano TLD reel and remove the original holding plate.

Take out the large lock nut by using the provided special tool or an ordinary wrench.

Clear the pinion gear teeth and attach the Gomexus TLD Power Handle SS85 stainless steel power handle arm.

Secure the main hex nut tight and put the lock cap screw in place so that it won’t become loose during heavy offshore fishing.

Remove the retainer screw and lock nut on your stock baitcasting handle.

Slide off the original arm and fit the new Gomexus BDH100-A27 Aluminum Handle onto the main shaft.

Tighten the hex nut firmly and secure it with the locking retainer plate.

Unscrew the original direct-drive handle assembly counter-clockwise from your Shimano Stradic body.

Thread the new Gomexus LMY-A38 Aluminum Spinning Handle into the main gear shaft.

Tighten securely and check for seamless, resistance-free rotation.

Unscrew the already existing nut.

Clean the shaft thread and properly place the Toray carbon fiber arm on the drive shaft of the reel.

Place the nut over the drive post and screw the arm.

Replace the retaining plate properly for effective operation, checking whether the titanium knob works without issues using your Gomexus 120mm Titanium Handle BDH-TA30.