1. Main Boat Steering Wheel Installation Procedures
💡 Pro Tip: A proper boat steering wheel installation is often the crucial first phase in a full Offshore Center Console Setup.
Action 1: Put Together the Power Knob
Stuff to do: Before setting up the steering wheel on the steering station for your boat steering wheel installation, you need to fit the power knob made of carbon fiber on the steering wheel by hand. Following that, press the provided mini wrench in the kit into service to tighten the knob while clinging onto the metallic base ▶ [02:40].
Action 2: Take Off the Old Center Cap and Lock Nut
Stuff to do: Use a cloth to cover the old steering wheel and use your movable wrench to take the lock nut off ▶ [05:01]. In case there is any safety clip or locking mechanism, you might need a flat-headed screwdriver to detach it first ▶ [05:49].
Action 3: Apply a Steering Wheel Puller (if needs be)
Stuff to do: As time goes by, marine steering wheels get stuck to the shaft tightly. Therefore, during a boat steering wheel installation, it’s better to avoid ruining the steering helm by using physical strength. Install the Steering Wheel Puller under the steering wheel and tighten it up in order to rotate it smoothly using the wrench that would help you pull the steering wheel out easily ▶ [06:40].
Action 4: Put the New Steering Wheel in Its Place
Stuff to do: Take the specific tool from the kit to take the center cap of the newly bought carbon fiber steering wheel and put it in place, not scratching it ▶ [07:44]. Fit the wheel on the steering shaft and push it down ▶ [08:16].
🛒 Looking for an upgrade? Explore our durable Stainless Boat Steering Wheel collection.
Action 5: Tighten Up with the Right Lock Nut and Socket Wrench
Stuff to do: Among all nuts in the kit, choose the one that fits (there are 1/2″, 5/8″, and 12mm nuts, available) ▶ [04:24]. Because the center is concave, you should use a large socket wrench to reach inside and tighten it properly ▶ [08:44].
Action 6: Return Back the Center Cap
Stuff to do: Fix the center protective cap back in the recess of the steering wheel to finalize your boat steering wheel installation ▶ [10:59].
2. Key Things to Remind During Boat Steering Wheel Installation
Necessary Tools
Common adjustable wrenches may fail to be put inside the center concave of the wheel; during your boat steering wheel installation, make sure you are equipped with the correct socket set to be able to tighten the main lock nut ▶ [08:44].
Avoid Using Physical Strength
Avoid using too much brute force or any metallic screwdrivers to detach the stuck old steering wheel, as it may damage the entire mechanism of the helm ▶ [06:10].
Preserve the Finish of Carbon Fiber
Carbon fiber has an elite appearance, but it is sensitive to scratch. Always utilize the special no-mar tool from the kit when removing caps that might touch the surface ▶ [07:44].
Be Aware of the Different Types of Equipment
In the box the kit has different sizes (the available ones are 1/2 inch, 5/8 inch and, 12 mm sizes). Before starting the boat steering wheel installation, make sure of the size of your specific boat helm shaft for a good fit ▶ [04:24].
Avoid Over-Tightening
While putting the nuts or the power knob, make sure they are tight but not excessively torqued (so that you do not spoil the threads) ▶ [09:44].