In addition to Shimano, Daiwa is another popular brand in the fishing industry. If you own a Daiwa reel and need to replace the handle knob, here's a step-by-step tutorial on how to remove and install a new handle knob on a Daiwa reel.
Daiwa is a leading manufacturer of fishing equipment and is known for producing high-quality reels. The company produces a wide range of fishing reels for different types of fishing, including spinning reels, baitcasting reels, and offshore fishing reels.
Daiwa Reel Introduction
Daiwa's reels are popular among both professional and recreational anglers for their durability, performance, and reliability. Daiwa produces a wide range of reels, including the popular Daiwa BG spinning reel and the Daiwa Tatula baitcasting reel.
Reel Handle Introduction
The reel handle is one of the most important components of a Daiwa reel, just like Shimano reels. The reel's handle knob may eventually be made to wear out, in which case a replacement is required. Also, anglers might wish to change the handle on their reel to match their rod or to personalize their fishing equipment.
Handle Knob Removal Tutorial for Daiwa Reels
This is a step-by-step guide for taking off a Daiwa reel's handle knob:
Step 1: Remove the Retainer Screw
Turn the retention screw counterclockwise with a screwdriver until it is released. As you remove the screw, take care not to lose it.
Step 2: Remove the Handle Nut
Loosen the handle nut by turning it counterclockwise with a wrench or pair of pliers. Once more, take care not to lose the nut while removing it.
Step 3: Remove the Handle Knob
After removing the handle nut, you can slide the handle knob off the handle arm.
Step 4: Remove the Handle Arm (if necessary)
If you must replace the handle arm, unscrew the screws holding it and remove it. Use a screwdriver to turn the screws counterclockwise until they come loose, and then lift the handle arm out of the reel body.
Step 5: Clean and Inspect the Reel Handle
Before installing a new handle knob, take a moment to clean and inspect the reel handle. Wipe it down with a clean cloth to remove any dirt, grime, or debris. Inspect the handle for any signs of damage or wear, and replace any damaged parts if necessary.
Step 6: Install the New Handle Knob
To install the new handle knob, simply slide it onto the handle arm and align it with the reel body. Make sure that the handle knob is seated properly on the handle arm.
Conclusion
I hope it was easy to use our Gomexus reel handle replacement guide to replace the handle knob of a Daiwa reel. It is a relatively easy process that can be done in just a few minutes with the right tools and a little know-how. Whether you have a Shimano or Daiwa reel, replacing the handle knob is a straightforward process that can be done at home with the right tools and instructions. By following the step-by-step tutorial provided in this guide, you can easily remove and install a new handle knob on your Daiwa reel.
