However, some anglers find that the stock handle is too small and doesn't provide enough cranking power. If you're looking for an upgrade, the Gomexus Aluminum Power Handle is a great option.
The Gomexus power handle is made from lightweight and durable aluminum. It features a larger, ergonomic knob that provides a more comfortable grip and greater cranking power. The handle is also easy to install and remove, making it a great choice for anglers who want to be able to swap out their handles depending on the fishing conditions.
This article will discuss the benefits of the Gomexus aluminum power handle for the Shimano Vanford reel, and provide a step-by-step guide on how to install it.
Benefits of the Gomexus Aluminum Power Handle for the Shimano Vanford Reel
There are several benefits to upgrading to the Gomexus aluminum power handle for the Shimano Vanford reel:
- Increased cranking power: The larger knob and longer arm of the Gomexus power handle provide more leverage, making it easier to crank in large fish and heavy lures.
- Improved comfort: The Gomexus power handle features a more ergonomic knob that is more comfortable to grip, even during long fishing sessions.
- Durability: The Gomexus power handle is made from lightweight and durable aluminum, making it resistant to corrosion and wear and tear.
- Easy installation: The Gomexus power handle is easy to install and remove, making it a great choice for anglers who want to be able to swap out their handles depending on the fishing conditions.
Instructions
- Remove the stock handle from the Vanford reel. To do this, use the Phillips head screwdriver to loosen the two screws that secure the handle to the reel body. Once the screws are loose, remove the handle by pulling it straight off.
- Apply a small amount of grease to the shaft of the Gomexus power handle. This will help to prevent corrosion and make the handle easier to turn.
- Slide the Gomexus power handle onto the shaft of the Vanford reel. Make sure that the handle is fully seated on the shaft.
- Secure the handle to the reel body with the two Phillips head screws. Tighten the screws until they are snug, but be careful not to overtighten them.
- Use a flathead screwdriver to tighten the set screw on the Gomexus power handle. The set screw is located on the side of the handle and helps to keep it in place.
- Use a pair of needle-nose pliers to tighten the lock nut on the Gomexus power handle. The lock nut is located on the bottom of the handle and helps to keep it from coming loose.
Once you have completed these steps, the Gomexus aluminum power handle will be installed on your Shimano Vanford reel. You can now start using your reel with the new handle and enjoy the benefits of increased cranking power, improved comfort, and durability.
Tips for Using the Gomexus Aluminum Power Handle
- When cranking in large fish or heavy lures, use the full length of the handle and apply even pressure. This will help to prevent the handle from becoming overloaded and breaking.
- If you find that the handle is too loose, tighten the set screw. If the handle is too tight, loosen the set screw.
- Be careful not to overtighten the lock nut. Overtightening the lock nut can damage the handle.
- If you are fishing in saltwater, rinse the handle with fresh water after each use to remove any salt and sand. This will help to prevent corrosion.
The Gomexus aluminum power handle is a great upgrade for the Shimano Vanford reel. It provides increased cranking power, improved comfort, and durability. It is also easy to install and remove, making it a great choice for anglers who want to be able to swap out their handles depending on the fishing conditions.
If you are looking for a way to improve the performance and comfort of your Shimano Vanford reel, I highly recommend upgrading to the Gomexus aluminum power handle.
