Daiwa Reel Handle Upgrades & How To Replace The Reel Handle

Buying Guide: How To Upgrades Daiwa Reel Handle

Looking for Daiwa replacement reel handles? Your daiwa handle may be broken, or you are a fishing master, and not satisfied with the original handle any more. Whatever the reason, Gomexus Reel Handles will satisfy you.
Daiwa Knob Upgrade: Custom Your Daiwa Power Knob Vous lisez Buying Guide: How To Upgrades Daiwa Reel Handle 8 minutes

Looking for Daiwa replacement reel handles?

Your daiwa handle may be broken, or you are a fishing master, and not satisfied with the original handle any more. Whatever the reason, Gomexus Reel Handles will satisfy you.

When it comes to fishing and parts for your rod, few names stand on top of the quality list like Diawa reel parts. Diawa has long been noted for quality and excellent craftsmanship, whether it is for fly-fishing equipment or bait casting reel and rod combos.

Regardless of the quality of Diawa everything can break under the right conditions, for this reason Diawa parts are very easy to find and even easier to replace when needed.

 

Single Or Double Reel Handle? Which one is better?

Both have their own merits:

A single reel handle will allow more leverage on the reel so the reel would feel more powerful. The actual handle grip is generally bigger too and you can get a proper hold of it rather than a finger and thumb job usually associated with doubles.

Double reel handles really only offer a better balance on the handle and I believe a double handle will be better from a wear point as the weight distribution from both sides of the handle would be transferred through the whole reel. When you spin them up you can see this as a double will always spin up balanced a single won’t.

Gomexus has 2 types of handles that can fit Daiwa Reel - spinning reel handles and baitcasting reel handles.

 

1. Spinning Reel Handles

Gomexus designed this power handle specifically for Daiwa BG fans, the Daiwa BG Handle with one-body aluminum knob is ergonomically designed. Reduce fatigue during fighting stripers compared to the original Daiwa handle. And the round power knob adopts weatherproof design, and will not be corroded by sea water and fish mucus. Special drip hole design for better drainage. 

Daiwa BG 5000 handle Plug&Play

【No Drilling】It only takes 10 seconds to install. Your Daiwa doesn't need complex drilling anymore.

Daiwa BG handle 10 seconds to install

Shop Now with $34.95>>

Plug&Play Power Handle For Daiwa BG MQ

【No Drilling】It only takes 10 seconds to install. Your Daiwa doesn't need complex drilling anymore.

Gomexus Handle For Daiwa BG MQ 5000-20000

Shop Now with $34.95>>

Plug&Play handle for Daiwa Saltist 4000

10seconds to install

Shop Now with $34.95>>

One Piece Design: more stable while reeling and better conduction efficiency.
Provide longer torque than stock handle, make it effortless to fight with fish.
Classic round shape knob, make it more comfortable to grip and there's larger area to force.

Gomexus handle for Daiwa Tatula LT 2500-4000
  • Weight: Only 1.66 oz/ 44 g
  • Length: 68mm
  • Knob Diameter: 38mm
  • Material: Aluminum

【Directly Fit For Daiwa Reel】

  • Ballistic LT
  • Certate/ Certate LT
  • Tatula LT
  • Fuego LT
  • Kage LT
  • Luvias/ Luvias LT 3000 - 5000
  • Daiwa BG 2000 2500 3000
  • BG MQ 2500 3000 4000

Shop Now with $59.95>>

Aluminum alloy handle with round titanium knob, ergonomically designed, sturdy and light, more comfortable to grip, larger area to force. Made by Titanium which is not cold in winter and not hot in summer.

Spinning Reel Handle with Titanium Knob for Daiwa
Plug&Play Titanium handle for daiwa BG MQ
  • Weight: Only 1.4 oz/ 39 g
  • Length: 68mm
  • Knob Diameter: 38mm
  • Handle Material: Aluminum
  • Knob Material: Titanium

【Directly Fit For Daiwa Reel】

  • Ballistic LT
  • Certate/ Certate LT
  • Tatula LT
  • Fuego LT
  • Kage LT
  • Luvias/ Luvias LT 3000 - 5000
  • Daiwa BG 2000 2500 3000
  • BG MQ 2500 3000 4000

Shop Now with $69.95>>

High precision integrated CNC machining. Double handle comparing to the single/power handle gives anglers the extra leverage in balance. Can keep stable speed easily under slow retrieve condition. Better Control for Eging As double handle is not automatically rotated by its weight.

Gomexus Handle Aluminum for Daiwa
Gomexus Handle Aluminum for Daiwa
  • Material: 7075 Aluminum
  • Weight: 34g, 38g
  • Length: 82mm ,98mm

【Directly Fit For Daiwa Reel】

  • Ballistic LT
  • Certate/ Certate LT
  • Tatula LT
  • Fuego LT
  • Kage LT
  • Luvias/ Luvias LT 3000 - 5000
  • Daiwa BG 2000 2500 3000
  • BG MQ 2500 3000 4000

Shop Now with $49.95>> 

2. Baitcasting Reel Handles

Gomexus Handle made by 7075 Aluminum, the handle plate is quite thick at the center to offer solid cranking. Comfortable grip and non-slip even the hand is wet due to the just nature cork material on the knob. Once intall, you will feel buttery smooth as the stock handle.

Daiwa Handle Aluminum + Cork BDH-CA27
Daiwa Handle Aluminum + Cork BDH-CA27
  • Left and right-hand reels both can fit
  • Length: 3.94inch/100mm; 4.72inch/120mm
  • Knob diameter: 1.06 inch/27mm
  • Weight: 1.26oz/35.7g; 1.4oz/40g

【Directly Fit For Daiwa Reel 8x5mm】

  • Tatula
  • Luna
  • Ryoga
  • Steeze
  • Zillion

Shop Now With $59.95>>

Made from 7075 Aluminum and comes with Japanese NMB bearings, that often last longer and are more sensitive to feel bait action underwater. The handle feels solid and great. It feels as buttery smooth as the stock handle. 

Daiwa Handle Aluminum + TPE BDH-A27

Daiwa Handle Aluminum + TPE BDH-A27
  • Left and right-hand reels both can fit
  • Length: 3.94inch/100mm; 4.72inch/120mm
  • Weight: 1.53oz/43.5g; 1.62oz/46g

【Directly Fit For Daiwa Reel 8x5mm】

  • Curado 300e
  • Cardiff 300
  • Tranx 300 400
  • Calcutta conquest 300 400

Shop Now with $59.95>>

The knob made of TPE material which has a larger frictional force than EVA due to the soft yet hard grip and fingers are less slippery than wet aluminum knob. Grip is really comfortable while reeling in fish and you can hold on a lot.

Daiwa Handle Aluminum BDH-TA20
  • Handle Material: premium CNC machining aluminum
  • Length: 3.94 inch/100mm
  • Weight: 25g/ 0.88oz(100mm)

【Directly Fit For Daiwa Reel 8x5mm】

  • Tatula
  • Luna
  • Ryoga
  • Steeze
  • Zillion

 Shop Now with $59.95>>

 

LC75 Series handle are all made by TORAY carbon fiber,which is top quality in carbon fiber industry.While having 7-9 times the steel strength, it is only a quarter of the weight of steel.

Daiwa Handle Carbon + Aluminum LC75-A38
Daiwa Handle Carbon + Aluminum LC75-A38
  • 【Length】: 2.95"/75mm
  • 【Thickness】: 0.157"/4mm
  • 【Weight】: 1.30oz/37g
  • 【Knob Size】:38mm Super Strong, Saltwater Resistant
  • 【Bearings】: Stainless Steel
  • 【Material Super Strong】: Twice Torque As Common Carbon

【Directly Fit For Daiwa Reel 8x5mm】

  • Ryoga
  • Zillion SV TWS HD
  • Steez TWS
  • Coastal TWS
  • CC80

Shop Now with $29.95>>

75mm length is longer than most stock handle for bottom fishing. Ergonomic round knob give you comfortable grip. Once using,you will easily win the battle with big fish out of the depths. Less pain,more power!

Daiwa Handle Carbon + Cork LC75-CA38
Daiwa Handle Carbon + Cork LC75-CA38
  • 【Length】: 2.95"/75mm
  • 【Knob Size】:38mm Super Strong, Saltwater Resistant
  • 【Bearings】: Stainless Steel
  • 【Material Super Strong】: Twice Torque As Common Carbon

【Directly Fit For Daiwa Reel 8x5mm】

  • Ryoga
  • Zillion SV TWS HD
  • Steez TWS
  • Coastal TWS
  • CC80

Shop Now with $29.95>>

 Carbon handle with Cork knob, Double Lightweight Experience.

Daiwa Handle Carbon + Carbon LC75-FA38
Daiwa Handle Carbon + Carbon LC75-FA38
  • 【Length】: 2.95"/75mm
  • 【Knob Size】: 1.5inch/38mm
  • 【Knob bearings】Japanese NMB
  • 【Weight】1.30oz/37g
  • 【Material Super Strong】: Twice Torque As Common Carbon

【Directly Fit For Daiwa Reel 8x5mm】

  • Lexa 300-LC
  • Sealine
  • Ryoga

 Shop Now with $39.95>>

 

How to replace the Daiwa reel handle?

Different reel handles have different installation methods, so please refer to the product page or our installation video page to find the guide.

Here let's take BDH-A27 handle installation as an example:

baitcasting reel handle installation guide

Daiwa Spinning Reel Models
(8x5mm hole size)

Recommend Reel Handles

Ballistic LT3000-6000

LMY-A38/ LMY-TA38

Fuego LT 3000-6000

Certate LT 2500 -5000

16 Certate HD 2500-4000

Luvias LT 2000-4000

Tatula LT 2000-4000

Ballistic LT

MDH-A20/ CDH-A20

Certate/ Certate LT

Tatula LT

Fuego LT

Kage LT

Luvias/ Luvias LT 3000 - 5000

Daiwa BG 2000 2500 3000

BG MQ 2500 3000 4000

Emeraldas 2508

LCDH-A20(Lock Type Reel)

Legalis LT 1000-5000

Revros 1003-4000

Revros LT 1000-4000

CREST 1000-4000

Freams 2004-4000

Exceler 1500-4000

Cardinal 2 1000-3000

Joinus 1500-5000

EM MS 2004-4000

legal 2004-3000

Gekkabijin MX

KIX

crossfire 2500

RZ 2500

sweepfire

Caldia kix

Sweepfire

Mission

RX IT

IM 750

CS

LTD

MG Z

Laguna

18 19 Emeraldas LT

Daiwa Emeraldas Handle

14 17 Emeraldas mx 2508

18 Emeraldas mx Air LT 3000S-CXH

12 15 Emeraldas mx Air 2508

09 Emeraldas mx 2506

Daiwa Spinning Reel Models
(8x5mm hole size)

Recommend Reel Handles

Tatula Elite

DC-S20 /TH-T22 /BDH-S22/ BDH-T22/ BDH-A20/ BDH-A27

Tatula SV TWS

Zillion

Steeze SV TWS

Lexa 300-LC

LC75-A38/ LC75-CA38/ SBC-EA41

Sealine

Ryoga

Saltiga

LM95 LM120/ LCD110-CT100/ LCD110/ DC-AS30

Saltiga BJ 100 200

Catalina

Catalina BJ 100 200

Millionaire

Fuego CT

Tatula